Article history: Received 18 March 2016 Revised 16 July 2016 Accepted in revised form 28 July 2016 Available online xxxx Photoluminescence piezospectroscopy (PLPS) was used as a non-destructive technique for the measurement of residual stresses within the thermally grown oxide (TGO) layer beneath plasma-spray thermal barrier coatings (TBC). The technique has proved to be very effective for such...

In this paper a functional graded material (FGM) thermal barrier coating (TBC) is prepared using Atmospheric Plasma Spraying (APS) method. The FGM layers were deposited by varying the feeding ratio of CYSZ/NiCrAlY and conventional CYSZ on a NiCrALY-coated Inconel 738 substrates. Hot corrosion behavior, bonding strength and the related failure mechanisms of a conventional TBC and a FGM TBC are i...

Thermally insulating ceramic coatings also known as thermal barrier coatings (TBCs) have been essential technologies to improve the performance and efficiency of advanced gas turbines in service at extremely high temperatures. The damage mechanisms of air-plasma sprayed YSZ thermal barrier coatings (TBC) with various microstructures were studied by microscopic techniques after thermal cycling. ...

Suspension plasma spraying (SPS) has become an interesting method for the production of thermal barrier coatings for gas turbine components. The development of the SPS process has led to structures with segmented vertical cracks or column-like structures that can imitate strain-tolerant air plasma spraying (APS) or electron beam physical vapor deposition (EB-PVD) coatings. Additionally, SPS coa...

In recent years plasma-sprayed coatings and polymer coatings have found wide application in manufacturing. Although the quality of the coatings improved over the years, there is a need for reliable NDE techniques to assess the quality and test the integrity of these coatings. Most existing techniques are not suitable for real-time applications. The introduction of synchronous thermal wave video...

The diesel / gasoline engine rejects about two thirds of the heat energy of the fuel, one-third to the coolant, and one third to the exhaust, leaving only about one-third as useful power output. Theoretically if the heat rejected could be reduced, then the thermal efficiency would be improved, at least up to the limit set by the second law of thermodynamics. Low Heat Rejection (LHR) engines aim...

Nanostructured ceramic coatings produced by plasma spray processes are being developed for a wide variety of applications that require resistance to wear, erosion, cracking and spallation [1]. In addition the process is being developed to make near net shaped ceramic performs by dissolution of the substrate after spraying. Attractive properties associated with a nanostructure (in general referr...